Ford Otosan, Raccoon electric motorcycle Raccoon Pro 2 and Pro 3 models have increased their sales prices once again. made.
Ford Otosan company Raccoon Mobility produced by local electric motorcycle Prices continue to rise. Initial prices of models Raccoon Pro 2 105,599 TL for Raccoon Pro 3 for 116,999 TL. These figures later increased significantly, and today, once again, a hike was made. 29 November after the hike insingle seater, without seat and box” 4 kW Raccoon Pro 2 model 147 thousand TL“single seater, without seat and box” 4 kW Raccoon Pro 3 if full 163 thousand TL had happened.
so today December 8 After the new hike as ofsingle seater, without seat and box” 4 kW Raccoon Pro 2 model 151 thousand TL“single seater, without seat and box” 4 kW Raccoon Pro 3 if full 167 thousand TL it happened. The company is in these really high prices. 18 percent VAT, 3 percent It states that there is an excise duty.
to get over them Raccoon Pro 2 with the model average range of 100 km can be obtained. This range varies depending on road conditions and driver and load weight. tricycle Raccoon Pro 3 In the model, the average range value according to the official sharing 85 km located at the level.
Both models use the same capacity li-ion battery pack, so the Pro 3 model loses range as it is heavier. Type B to use (No A2 Requirement) other technical details of modern designed models with sufficient driver’s license are given below.
YOU MAY BE INTERESTED
Raccoon Pro 2 technical specifications:
-Motor power: 4 kW
-Battery capacity: 5 kWh
-Top speed: 45km/h
-Weight: 145 kg including battery
– Ground clearance 150 mm
-Headlights: LED
-Charging time: 4.5 hours
– Payload: 155 kg (Driver + load)
-Display: 5 inch TFT screen
-Tire diameter: Front 100/90R14 rear 130/70-R13
-Brake: Combined Hydraulic Disc Brake (Front and Rear)
Ford Otosan Raccoon Pro 2
Ford Otosan Raccoon Pro 2
Ford Otosan Raccoon Pro 2
Ford Otosan Raccoon Pro 2
Ford Otosan Raccoon Pro 3
Ford Otosan Raccoon Pro 3
Ford Otosan Raccoon Pro 3
Ford Otosan Raccoon Pro 3
Ford Otosan Raccoon Pro 3
Raccoon Pro 3 technical specifications:
-Motor power: 4 kW
-Battery capacity: 5 kWh
-Top speed: 45km/h
-Weight: 171 kg including battery
– Ground clearance 144 mm
-Headlights: LED
-Charging time: 4.5 hours
– Payload: 179 kg (Driver + load)
-Display: 5 inch TFT screen
-Tire diameter: Front 100/90R14 rear 2×130/70-R13
-Brake: Combined Hydraulic Disc Brake (Front and Rear)