XPG Valor Air review

XPG, whose different products we have previously reviewed, also offers computer cases to users. We have been using the company’s XPG Valor Air model for a while, and in this article we will talk about the usage experience as well as the features of the case.

XPG Valor Air review

First of all, the Valor Air model, which comes with all the slides and screws for installation, is a model that focuses on price performance compared to computer cases of similar class. When we first look at the case, of course, the tempered glass detail on the side attracts attention. This design line, examples of which we have seen frequently recently, brings with it the potential to look more stylish with the hardware you place inside the case.

When we open the 3 mm thick tempered glass, we see that a steel panel is used in the motherboard tray. The necessary mechanism has been installed at the back to hide the cables. When you complete the installation, the cable clutter on the front is reduced to a minimum, depending on the hardware you use. The Power Supply is now positioned at the bottom as we are used to. Since the cover completely covers this part, it does not disrupt the design line.

Valor Air has a compact structure in terms of design. It feels light yet solid. The ventilation grilles of the case are positioned in suitable places for air circulation inside. When we look at the top, we see filters that already have a magnetic structure. When you remove the filter, the double fan slot where the liquid cooling radiator can be installed attracts attention. Of course, you can also install liquid cooling on the front panel if you wish. Incidentally, this model is not suitable for a triple fan structure, but in a dual fan system it provides trouble-free use on both the top and front panel.

White lines combined with filters create a stylish look. I didn’t go for such a use because I like simplicity, but the diagonal spaces on the front have the potential to offer a very stylish look with the choice of colored fan you place on the interior panel. When we look at the top of the case, we see that there is an on/off button, a Reset button, a 3.5 mm Jack input and two USB 3.2 connections. It is a nice detail to include an LED driver indicator in the middle of the reset button. It wouldn’t be bad if there was a Type C port here, but the company overlooked this issue. Fortunately, it is good that the 3.2 option is offered on the USB side.

When you remove the front panel on which the red XPG logo is located, the first thing you see is the air filter. Just below, you will find 120×3 fans and mounting slots where you can install the fans. There is another 120 mm fan on the back for air circulation. Speaking of the motherboard, we need to say that the Valor Air EATX is not a suitable model for installation, it is a Mid Tower case and, as I said at the beginning, it has a more compact design line, but you can also fit ATX motherboards into it. It supports ATX, mini ATX or micro ATX form factors. On the graphics side, it is possible to place cards up to 305 mm long.

Valor Air also offers the necessary equipment for additional driver installation. Although today we meet our SSD needs through the M2 slots on the motherboard, there are also times when we need normal SSD slots. Moreover, the number of people who want to use these SSDs is quite high. In this regard, two 2.5-inch drive sleds are also included, corresponding to the rear panel side of the case. Again, we see that there is the necessary space for 2.5 inch and 3.5 inch drivers right next to where we position the power supply. In other words, apart from the M2 solution, a wide range of options are also offered for normal SSDs.

On the installation side, of course, we see that the cabling for the front panel connections is positioned according to the layout of the case. In addition to Power and Reset, there are LED lighting, HD audio and USB 3.2 cables that provide front panel connection.

As a result, XPG Valor Air has managed to capture its own style with both its design and simple lines. The fact that the filter magnets are a little weak may cause slipping, but other than that, I did not encounter any errors in general use. The air flow is good, and the case is provided as required in terms of price and performance. Considering that cases with similar performance are sold at much higher prices, we have to admit that XPG Valor Air has an advantageous structure in this context.

Technicial Specifications

• Size (H*W*D): 460 x 210 x 371 mm (18.10 x 8.28 x 14.60 inches)
• Color: Black / White / Pasture Edition
• Material: SPCC
• Side Panels: 3mm Tempered Glass x1 (Left side)
• Form factor: Mini-ITX, Micro-ATX, ATX
• 3.5″ HDD/HDD Tray: 2
• 2.5″ HDD/SSD Tray: 2+1 (Combo 3.5” + 2.5”)

I/O Port

• x2 USB 3.2 Gen 1
• x1 3.5mm audio/microphone combo jack
• x1 Reset Button
• x1 Power Button

Internal fans

• Front: 3 x 120mm Fans
• Rear: 1 x 120mm Fan

Fan Support

• Front: 120mm x3, 140mm x2
• Top: 120mm x2, 140mm x2
• Rear: 120mm x1

Radiator Support

• Front: 360/280/240mm
• Top: 240mm
• Rear: 120mm

Assembly details

• Graphics Card Length Limitation: 335 mm – 305 mm (with pre-installed fans)
• CPU Cooler Height Limitation: 166 mm
• PSU Length Limitation: 160mm-180mm (with HDD/SSD tray)