Players accidentally destroy his gaming PC of his girlfriend, a simple trick is the rescue

earthpressnews

A user on Reddit reports that he accidentally paralyzed his girlfriend’s PC when he tried to replace the RAM bars. After the exchange, the PC did not want to start. After many attempts and with the help of the community, the error could finally be fixed with a trick.

What happened? At Reddit, a user tells that he exchanged RAM bars on his girlfriend’s PC. He exchanged the Kingston DDR4 2133 8 GB bar against the Corsair Vengeance Pro 3200 8 GB. However, the PC was quite old, as the player noted, and installed a gigabyte Z170N-WIFI mainboard. After the RAM was installed, the fright followed: the PC could no longer be switched on. When the power button was pressed, the lights started, the fan turned briefly, but the screen remained black. It seemed as if the PC was hanging in a restart loop until the user ultimately pulled the plug.

What are BIOS and CMOS?

  • BIOS: Stands for Basic input/output system and is the basic control unit of a PC. It ensures that the hardware is correctly recognized and determines the order in which the system starts. It also manages important settings such as RAM compatibility.
  • CMOS: Is a small memory chip on the mainboard that stores these BIOS settings. So that the data is preserved when the PC is switched off, there is a small CMOS battery that supplies the memory with electricity.

    • The player was already afraid of destroying his girlfriend’s PC. On the advice of the community, he decided to reset the CMOS and remove the battery in order to reset the BIOS to the factory settings. He also made sure that the slots are clean and the bars are properly sitting when he used them again.

    It was his last attempt to get the PC up and running again. But not in vain, because the PC woke up again and started without any problems.

    Nintendo shows the Switch 2 for the first time in the trailer

    More videos

    Autoplay

    What was the problem? After replacing the RAM bar, the PC could no longer start properly. The problem was probably due to incompatibility or incorrect BIOS configuration. When the user used the new RAM bar, the BIOS may not be properly adjusted on it or could not bypass the new hardware.

    In such cases, an endless loop can occur when starting where the PC drives up, but does not spend a picture signal or continues to restart. Such problems often occur when new components are installed, but BIOS is not adapted to the changed hardware.

    How was the problem solved? The solution was to reset the CMOS, which put the BIOS back on the factory settings. To do this, the user removed the CMOS battery for a few minutes, which deleted all saved BIOS settings. This forced the system to recognize the hardware the next time you start and use the default values.

    A CMOS reset is a proven method to fix compatibility problems after significant hardware changes such as the exchange of the RAM or the CPU. After the battery was used again, the PC started successfully and worked perfectly.

    If your PC does not start, it is important to understand the potential mistakes that can occur when assembling a PC. When installing components, faults quickly make errors that can have far -reaching consequences. Some of these mistakes are not only annoying, they can also be really expensive. We show you serious mistakes in PC construction, which you should definitely avoid.

    mmod-game