Installing a pellet stove: how to go about it?

Installing a pellet stove how to go about it

The pellet stove is ideal when you want to heat yourself at the best price. Capable of drastically reducing your heating bill, it appeals at least as much as it is required. But how do you install a pellet stove? This is what we suggest you see here.

You will also be interested

A device capable of reducing or even dividing your heating bill by two or three, the pellet stove remains simple and quick to install. However, everything must be done within standards or by qualified craftsmen in order to have an installation that meets current expectations.

To install a pellet stove it is essential to respect certain conditions

Thus, to install a pellet stove you will have to respect certain conditions. If you want to do the installation yourself, you will have to take into consideration, among other things:

  • an installation distance suitable for the materials and the location;
  • an arrival ofair sufficient and optimized;
  • proper exhaust ducts and an adequate outlet.

So many points on which we suggest you come back in detail to understand the challenges of installing a pellet stove.

Respect distances

To properly install your pellet stove you will have to put it at a suitable distance from certain materials such as certain walls. For this reason, look at the instructions for your pellet stove which will tell you the safety distances to be respected, in particular from so-called “materials”. fuels “.

It is important to check the material surrounding your pellet stove. If the room dedicated to the stove has a parquet, you will need to insulate the stove from the ground. You can, for example, use asteel from 2 to 4 millimeters. Also consider the location of the stove to optimize the heating of your home. If in doubt, contact professionals who will be able to advise you and guide you as best as possible to install a pellet stove.

Think about the air supply needed for the pellet stove

Pellet stoves need an air supply so that the process of combustion of pellets is done. Have you chosen the location for your stove and complied with the standards? In addition to maximizing your heating, the air supply will allow the proper functioning of your pellet stove. You will have two choices here: make an indirect one, or create a direct one, and in these configurations the procedure to be followed will be specified in the instructions for your stove.

In all cases, an air supply is important to protect your stove from rust and to allow your heater to function properly. Without air, and this is the point to remember: your heating will not work.

Install the smoke exhaust ducts

Do you have the location and the air supply? Now you need to install the flue gas pipes. If waterproofing is to remain your main priority, you will also need to go further.

This can range from installing a chimney flue, or even a chimney if you don’t have one, to installing the flues themselves. via suitable tubes. If the installation of these tubes remains relatively easy for a single-storey house with an aligned chimney / pellet stove location, in some cases it can be more complex. Real work is then necessary. From the roof exit to the floor or floor crossing, the installation of evacuation ducts smoke remains the most complicated step. All the more so if the conduits are non-existent and they must take angular paths.

It may be necessary to call in a Qualibois certified professional. However, if you want to do it yourself, you will need to adhere to certain measures:

  • a protected roof exit;
  • no more than two elbows at right angles for the connecting ducts, and not more than 2 to 45 degrees for those draining the fumes;
  • an insulated exterior pipe;
  • an insulated floor crossing.

Interested in what you just read?