5 grandma’s tips for cleaning your iron

Irons today are nothing like those of our grandmothers and great-grandmothers. These were in metalto be heated regularly so that they can iron or melting with a hollow interior where it was necessary to lay glowing embers. Also, they did not get clogged like steam generators or irons with a tank that should be cleaned regularly.

How do you clean the inside of your iron?

The cleaning of a iron starts with cleaning the inside. Repairing the sole will be a fruitless task if the tartar settled in the tank.

The frequently adopted solution remains the use of white vinegar, a product recognized for its multiple effectiveness. The operation therefore consists in filling the tank of the iron half, then operate the iron without intending to iron. Be careful though, the vapors of white vinegar are irritating, do not hesitate to carry out this manipulation in front of an open window or, if possible, in full air.

For a steam generator, we speak of “emptying” which is done by unscrewing a plug on the side of the device. However, white vinegar can also be effective in removing stubborn traces of tartar.

How to clean the soleplate of an iron?

Cleaning your iron involves removing dirt from the soleplate, which may be blackened or whose holes are provided with limestone.

Tip 1: white vinegar

White vinegar remains one of the best known tips for cleaning your iron. However, for it to be really effective, white vinegar must be applied to a hot sole using a clean cloth folded in several thicknesses to avoid Burns. It is necessary to rub vigorously to see the traces disappear. Finally, you can wipe the soleplate with a clean, damp cloth.

Tip 2: Coarse salt

Salt is renowned for its anti-tartar and degreasing action. Thus, to clean your iron with coarse salt, you should spread a handful or two on newspaper, turn on your iron, then pass it for a few minutes on the grains of coarse salt before noticing the disappearance traces on the sole. You will need to wipe it with a damp, clean cloth to erase any remaining marks.

Tip #3: baking soda

the bicarbonate of welded, like white vinegar, is an effective ally with multiple virtues. To clean an iron, it is very useful. This solution consists of making a paste of baking soda mixed with a little water. You can then apply it to the soleplate of your iron using a cloth by rubbing. In this way, you will come to the end of the black traces and limestone formed under your iron.

Tip 4: household alcohol

L’alcohol household cleaner is a product for domestic use whose main characteristics are: to clean, degrease, disinfect and detach. Its action will be effective in removing black or limescale marks from the soleplate of your iron. Thus, you can soak a soft cloth in household alcohol and rub off the residue that has adhered to it.

Tip 5: clay stone or white stone

The clay stone is a compact and multi-purpose product made from clay, limestone and soap. This three-in-one product is therefore particularly useful for everyday use in the home. Also, when it comes to cleaning your iron, the clay stone turns out to be very useful. A damp sponge soaked in this product and rubbed on the soleplate of your iron will remove stains. Remember, however, to rinse the surface with a damp, clean cloth.